| Conditions of Use: |
Car Type, Trailer Type, Marine, Land Use |
|---|---|
| Usage: | Standby Unit, Common Units |
| Output Type: | AC Three Phase |
| Cooling Method: |
Water Cooling |
| Installation Method: |
Portable |
| Generator Type: |
Diesel Generator |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier Operation of the module DEEP SEA Genset Controller DSE 501 is via a three position key switch mounted on the front panel with STOP(O), RUN(I) and START(II) positions. In the 'O' position the DC provide is removed from the module and the run relay and alarm output are de-energised. If the switch is turned to the 'I' position the module is powered up and the run relay is energised, activating the engine fuel/ignition system and the protection hold-off timer is initiated. If the switch is moved to the 'II' position and held against the spring return, a positive provide is applied to the relevant output terminal and on to the starter motor. Once the engine has started the switch should be released and allowed to return to the 'I' position.
Operation of any of the following alarms; Low Oil Pressure, High Engine Temperature, Auxiliary Shutdown, Overspeed (Optional), will cause the run relay to de-energise. This will remove the fuel/ignition provide from the engine and bring it to rest. The alarm output will be activated giving a positive DC output.
Each alarm channel has it's own LED indicator and once activated no further alarm conditions will be accepted. The alarm output and relevant LED will remain active until the unit is reset by turning the switch to the 'O' position.
Overspeed Protection (Optional) is achieved by the fitment of an additional PCB in the module. This provides integral overspeed protection derived from either the generator HZ output or the engine magnetic pick-up (specified on ordering). The overspeed circuit continuously monitors the engine speed and will shut down the engine immediately if a pre-set speed level is exceeded. This trip level is adjustable from 90% to 130% of full rated speed and is suitable of both 50Hz or 60Hz systems.
During engine cranking and for a short time afterwards the protection hold-off timer is active and the relevant alarms inputs are inhibited. This enables the engine to start and achieve normal running conditions. Once the timer has expired the inputs are enabled providing normal protection from the module.
Charge Failure warning is also provided by monitoring the WL terminal on the charge alternator. This operates on a similar principal to the warning lamp fitted in a motor vehicle, should the output fail the charge fail LED will illuminate. The module will also provide the alternator excitation current via this connection.
| Power Supply | 9 to 33 Vdc Continuous |
| Cranking Dropouts: | Able to survive voltage dips during cranking. Without the need for internal batteries. |
| Alternator Input Range | 15 - 305 V AC RMS |
| Alternator Input Frequency: | 50 - 60 Hz at rated engine speed |
| Magnetic Input Range | 0.5 V to +/- 80 V |
| Magnetic Input Frequency | 2300Hz to 6000 Hz at rated engine speed |
| Start Relay Output: | 16 Amp DC at supply voltage |
| Run Relay Output: | 16 Amp DC at supply voltage |
| Alarm Output | 1 Amp DC at supply voltage |
| Operating Temperature Range: | -30 to +70°C |
Atechi Power Machinery Co., Ltd. is a professional supplier of generator spare parts and accessories. We provide full range of spare parts and accessories for generating set which include control module, sensors, meters, fuel pumps, mains floating charger, relay, engine starter, DC alternator, solenoid, lock and hinges, soundproof material, ATS etc.
in one word, Atechi aims to provide one-stop service for your generator spare part demand. The quality of our spare parts is very reliable because we have used original and genuine spare parts used by the original engine manufacturer. For instance, engine manufacturer A is using B Company's engine starter, then we buy directly from B Company for engine starter. We use some famous products such as Woodward stop solenoid, Fleetguard filters, Mitsubishi starter motor and alternator etc. We also are very familiar with quality parts and accessories suppliers in China. Engine brands we serve Those engine brands which we can provide spare parts service includes LOVOL, Yangdong, Weichai, YTO, WEICHAI DEUTZ, Volvo, etc. The staff of Atechi Machinery is honest, responsible and considerate. They are with good experience in generator industry, too. That's because Atechi people clearly understand that good service, good products and being innovative are the key factors to survive and develop in a time full of fierce and transparent competition.
Payment: 100% payment before delivery for Stock goods;30% deposit and balance before delivery for production goods
Delivery : 80% goods are in stock can delivery with 24hours. Production goods will cost 3-7days usually according to the quantity.
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}